WIMBERLEY · Gimbals and panoramic heads
Wimberley MH-100 MonoGimbal head for monopods
When to choose it
The MH-100 suits a photographer who follows movement with a long lens on a monopod. The head supports the lens at its side rather than placing it on a platform directly underneath. Check the foot and lens collar so you can position and balance the rig as the manual describes.
Wimberley gives separate mounting procedures for a 3/8-16 stud and a compatible quick-release clamp. Confirm which one you use below the head and which lens plate or foot you need above. Compare a dedicated tripod gimbal if the rig usually stays on three legs.
Specifications
- Brand
- WIMBERLEY
- Upper connection
- Arca type
- Lower connection
- Arca-type dovetail or flat 3/8-inch thread
- Model
- MH-100
- In the box
- MH-100 MonoGimbal head
- Use
- Side-mounted monopod support
- Lower attachment
- 3/8-16 stud or documented clamp
- Lens receiver
- Arca type
- Reference
- MH-100
- Amazon.com reference
- B07W68TWBB
Fit and buying advice
Check the exact lens and foot against the maker's chart. Use the head in the position shown for the monopod mounting method you have.
Care Follow the manual's mounting sequence and check the lens clamp while supporting the equipment.
Related choice Leofoto MPG-02L lever-release gimbal attachment ↗
Compare options in this department ↗
Documentation
Questions about this accessory
Can I fit it without a clamp on the monopod?
Wimberley documents direct installation on a 3/8-16 stud. Check the stud on your monopod.
Does it include the plate for my lens?
Use the lens chart to identify the compatible plate or foot separately. The listing selects the head.
Why choose a side-mounted head for a monopod?
It is designed around a supported long lens on one leg. Use the setup procedure for balancing and changing angles.
