LEOFOTO · Quick-release clamps
Leofoto DC-24 compact screw-knob quick-release clamp
When to choose it
The DC-24 is a small Arca-type receiver for a build that already has a suitable mounting point. Its screw knob lets you open the jaws by turning the control. Check that you can reach the knob with the clamp mounted next to any other accessory.
The 24 mm label describes the clamp body width, not a plate opening dimension. The selected listing identifies 1/4- and 3/8-inch mounting options, so inspect which mounting hardware your support needs and confirm your plate's fit separately.
Specifications
- Brand
- LEOFOTO
- Upper connection
- Arca type
- Lower connection
- Threaded support with mounting hardware
- Model
- DC-24
- In the box
- DC-24 clamp
- Width
- 24 mm clamp body
- Lock
- Screw knob
- Upper profile
- Arca type
- Mounting options
- 1/4 and 3/8 inch per selected listing
- Amazon.com reference
- B081QXHYRC
Fit and buying advice
Match the exact dovetail and confirm stop-screw and knob clearance. The DM-47 on the manufacturer's shared page is a different size.
Care Check the fastener under the clamp and move the screw knob through its range without a load before fitting the camera.
Related choice Benro QRCT70 Arca-type quick-release clamp ↗
Compare options in this department ↗
Documentation
Questions about this accessory
Can I use a plate with stop screws?
Check how much clearance the clamp gives the screws as the plate enters. Use the actual plate and clamp combination.
What does 24 mm measure?
It describes the DC-24 body width in the specifications. It does not establish a dovetail opening or plate width.
Why choose the screw knob over a lever?
It allows you to adjust the jaw opening by turning the knob. Make sure there is room to operate it on the support.
