Manfrotto · Model-specific plates
Manfrotto 410PL low-profile RC4 plate
When to choose it
The 410PL is a spare platform for selected RC4 heads. It lets you leave a plate on a second camera and switch bodies without moving the first plate. The package provides 1/4-inch and 3/8-inch screw options, so choose the one that fits the camera or support foot.
Manfrotto identifies the 410 and 405 geared heads among its documented uses. Check the manual for the exact receiver. An RC2 plate can have a similar camera screw while using a different underside, so confirm both connections before ordering.
Specifications
- Brand
- Manfrotto
- Upper connection
- 1/4-inch or 3/8-inch camera attachment
- Lower connection
- Manfrotto RC4 / 410PL
- Model
- 410PL
- In the box
- 410PL plate with 1/4- and 3/8-inch screws
- Receiver
- Manfrotto RC4
- Model
- 410PL
- Camera screws
- 1/4 and 3/8 inch
- Documented examples
- Manfrotto 405 and 410
- Amazon.com reference
- B00009R6H2
Fit and buying advice
Choose by the head's documented 410PL receiver and confirm the camera socket. The camera-side screw options do not change the lower profile.
Care Fit the screw that matches the camera and check that the plate seats fully before closing the receiver.
Compare options in this department ↗
Documentation
Questions about this accessory
Does it fit the 410 Junior Geared Head?
Manfrotto lists 410PL for that head. Check the camera-side screw separately.
Which side changes when I select a different screw?
The screw changes the camera connection. The underside remains RC4.
Can it replace a 200PL on an RC2 head?
Use the plate specified for the receiving head. The 410PL belongs to RC4.
