IFOOTAGE · Leveling bases
iFootage QL-I threaded tripod leveling base
When to choose it
The QL-I fits a tripod with a compatible 3/8-inch connection and gives the head above it a separate way to level. Use it when the legs already stand securely but the head needs a small correction before you start panning or aligning the camera.
Check the upper and lower 3/8-inch connections and give the locking control enough room to move. This leveler is useful as part of an existing rig. Compare a bowl-compatible unit if the tripod's main support connection is a bowl rather than a threaded platform.
Specifications
- Brand
- IFOOTAGE
- Upper connection
- Flat 3/8-inch stud
- Lower connection
- Flat 3/8-inch thread
- Model
- QL-I
- In the box
- One QL-I leveling base
- Upper connection
- 3/8-inch screw
- Lower connection
- 3/8-inch thread
- Control
- Locking lever
- Reference
- Bubble level
- Amazon.com reference
- B09BVGR397
Fit and buying advice
Confirm the space around the lock and the exact mount of the separate head. The leveler changes angle but does not add its own fluid head controls.
Care Use the bubble to set the platform, then lock the leveler before operating the head.
Related choice Leofoto LB-60N flat threaded leveling base ↗
Compare options in this department ↗
Documentation
Questions about this accessory
Does it have a quick-release clamp above?
The product documentation identifies a 3/8-inch screw at the top. Use the separate head or receiver that fits it.
Why place the leveler below a gimbal or pan head?
Leveling the support first gives the head a horizontal starting point for rotation.
Will it fit a bowl without an adapter?
Match the threaded lower connection. Check a documented adapter if the tripod has a different interface.
