LEOFOTO · Leveling bases
Leofoto LB-75S threaded leveling base with 75 mm bowl adapter
When to choose it
The LB-75S makes sense when the legs have a 75 mm bowl and the head needs a 3/8-16 stud above it. Leofoto documents an adapter for the bowl and a twist lock beneath the leveling platform. Use the bubble to set level before you adjust the head's own controls.
Compare it with an integrated-clamp leveler if you want to mount a plate directly. This selection supplies a threaded stud above the platform. Check what the head actually accepts and how much room there is for the lock with the legs low.
Specifications
- Brand
- LEOFOTO
- Upper connection
- Flat 3/8-inch stud
- Lower connection
- 75 mm bowl
- Model
- LB-75S
- In the box
- LB-75S leveling base with bowl adapter
- Upper mount
- 3/8-16 stud
- Bowl adapter
- 75 mm
- Control
- Butterfly handle
- Adjustment range
- Up to 15 degrees each way
- Amazon.com reference
- B0GR52C6FC
Fit and buying advice
The maker describes threaded mounting and a bowl adapter as distinct interfaces. Verify the supplied parts before assuming it can replace an Arca-type receiver.
Care Set the horizon with the bubble, then secure the handle. Check the head is seated on the upper platform and follow Leofoto's attachment guidance.
Related choice Leofoto LB-60N flat threaded leveling base ↗
Compare options in this department ↗
Documentation
Questions about this accessory
Does the platform hold an Arca-type plate directly?
The top has a 3/8-16 stud. A plate needs a separate compatible receiver.
Does the 75 in the name refer to the upper stud?
It refers to the documented bowl adapter size for this model. Check the top thread separately.
When does a butterfly handle help?
It gives you a control below the leveler to lock the adjusted position. Confirm room to reach it at the leg angle you use.
